Pharmaceutical Cleanroom GMP Pass Box
Guangzhou Anlai Air Purification Equipment Manufacturing Co.,Ltd
Globe | Chinese Simplified| Chinese Traditional
Products Home  >> Cleanroom Pass Box

Pharmaceutical Cleanroom GMP Pass Box

  • Model: AL-PB Series
  • Category: Clean Room Pass Through
  • Applicable: Small articales/materials
  • OEM: Customized design is available
  • Electrical: 220V/110V 50Hz/60Hz
  • Optional: Interphone / UV light

  • send_inquiry
Product Details

Pharmaceutical Cleanroom GMP Pass Box requirements
1, The pass box surface should be smooth, no glitches, no dust, easy to clean, all the gaps using food grade neutral sealant;
2, The pass through box must be suitable for space maintenance and repair;
3, Hide all wires should not be exposed;

4, All instruments and test instrumentation calibration are required by the legal department, and traceability.


Verify the Installation of the Pharmaceutical Cleanroom GMP Pass through Box
By the supplier’s technical personnel as the main installation personnel, engineering personnel to assist with installation. The installation process for the device and check the working status. If the confirmation process found because UV lamp does not meet the requirements resulting bias, engineering staff responsible for the purchase and replacement of the UV lamp. The results are recorded in the installation confirmation Annexes 1 and 2.

Description of Confirming Project
Work environment confirming: the pass through should be installed between the non- clean area (training room) and clean area (clean corridor). Non-clean area temperature should be 18
~ 27 ; relative humidity should be 40 % to 80 %.
Power supply: recognized in right connection, Power supply: AC (220 ± 22) V.

UV lamp should be normal, no damage, matching closely connected, and power supply confirmed
Pass through box washers should be supporting the side door, seal, intact.
Internal Pass through Box with UV lamp surface should be clean, dust -free surface.
Pass through Box material should be stainless steel, flat and smooth abrasion.

Other spare parts confirming

Static Pass Box

Model

AL-PB-500

AL-PB-600

AL-PB-750

AL-PB-800

External Size (W×D×H)mm

660×500×600

760×600×700

910×750×850

960×800×900

Internal Size (W×D×H)mm

500×500×500

600×600×600

750×750×750

800×800×800

Material

Outside: External is steel with power coated or stainless steel

Work area: stainless steel

Material Thickness

1.0/1.2/1.5mm

1.0/1.2/1.5mm

1.0/1.2/1.5mm

1.0/1.2/1.5mm

Glass Window Size

350x350x8

395x395x8

480x480x8

480x480x8

Interlock System

Mechanical Interlock / Electronic Interlock

Power supply

(Electronic Interlock Or UV light)

220V/50Hz

220V/50Hz

220V/50Hz

220V/50Hz


Laminar flow Pass Box/Dynamic Pass Box

Model

AL-AAB-500

AL-AAB-600

AL-AAB-750

AL-AAB-800

External Size (W×D×H) mm

840×500×1350

940×600×1450

1090×750×1600

1140×800×1650

Internal Size (W×D×H) mm

500×500×500

600×600×600

750×750×750

800×800×800

Noise Level(dB)

<62

<62

<62

<62

Air flow Diffuser plate

316/304 Stainless steel mesh plate

Wind Speed

0.38-0.57m/s adjustable

Pre-filter

Size (W×D×H) mm

525×275×17

560×275×17

560×275×17

560×275×17

Efficiency

G4

G4

G4

G4

HEPA Filter

Size (W×D×H) mm

484×484×69

630×630×69

630×630×69

630×630×69

Efficiency

99.99% 0.3µm

99.99% 0.3µm

99.99% 0.3µm

99.99% 0.3µm

Power Supply

380V/50Hz

380V/50Hz

380V/50Hz

380V/50Hz

Total Power

750W

750W

750W

750W

Customized design is welcome for Pharmaceutical Cleanroom GMP Pass Box

 

PreviousGeneral Static Pass box

NextAL-PB600 Pass Thru Boxes

Related Product
Online xuanfu_sub
xuanfu_img

xuanfu_msn MSN

xuanfu_skype Skype

xuanfu_qq QQ

xuanfu_ali Alitalk